Science Equipment Inventory
  Description, special instructions Vehicle Compatibility Quantity For information on access and use of these tools:
       
SAMPLERS        
       
Hot water samplers 760 ml inert titanium, used singly or in pairs ALVIN    
         
Water samplers
1.7 liter Go-Flo type (PVC) ALVIN    
  .5L Jason2    
         
Push cores 2.5" ID, 12" long ALVIN, Jason2    
         
Slurp pump 90 GPM, 2.5" inlet, no collection devices ALVIN, Jason2    
         
Sample nets Assorted scoop sizes ALVIN, Jason2    
         
Scoop bags   Jason2    
         
Bio Box for collecting biological samples Jason2 2  
         
Rock Sampling Set-up Capable of collecting 24 individual rock samples Jason2    
         
Elevator   Jason2    
         
       
       
INSTRUMENTS        
       
Low temp probes 0-20C, 0.5 deg accuracy, .001 deg resolution ALVIN    
         
High temp probes 30-800C, 5 deg accuracy, 0.1 deg resolution ALVIN    
         
Temperature probe Inductively coupled link Jason2 1  
         
Heat flow probes 0-40C, 0.2 deg accuracy, .001 deg resolution ALVIN    
0.66 m or 1.0 m length, 5 thermistors, 0-20 w/m heater    
         
IFG magnetometer 1000 nT accuracy, 0.1 nT resolution ALVIN, Jason2    
3-axis flux gate with Z gradient, 4-channel    
         
Imagenex scanning sonar >100m range, 1.7 deg pencil beam for profiling ALVIN, Jason2    
Scanning head is on the sub's centerline, 185 inches behind the pilot's viewport and 8 inches above the bottom of the skids    
Click here for Setup Instructions    
         
Sea-Bird CTD 0-7 S/m, .001 S/m/month accuracy, .0001 S/m resolution ALVIN    
-5 to 35C, .01C/6 month accuracy, .001C resolution    
0-10,000 psia, 50 psi accuracy, 5 psi resolution    
       
Note: investigators should record S/N of temperature probes used at sea for post-cruise calibration reasons.      
       
ADDITIONAL VIDEO EQUIPMENT        
       
SIT TV camera   ALVIN    
         
CCD color TV camera   ALVIN    
List Additions?
Vehicles or systems can be added to this list, by answering the questions on the following form:
<Tool Inventory form>